Triton TT55

Concrete Repair

BSSP 10 Fosroc 18 Tarmac 4 Weber 7 DCP 6 Flexcrete 10 Ultracrete 3 Sika 4 Parex 5 Nufins 4 Ardex 6 Ronacrete 14

Concrete Treatments & Coatings

Surface Treatments 14 Concrete Coatings 15

Corrosion Prevention and Sealing

Corrosion Prevention 5 Viscotaq 5 Denso 4 Filoform 3

Expansion Joint Fillers

Gabion Baskets & Gabion Mattresses

Geotechnical

Ground Gas Protection

Monarflex 2 Visqueen 12 Juta 16 Cordek 5 RIW 7 Corden EPS

Grouts, Anchors & Formwork

Formwork 15 Grouts & Anchors 19

Highway Repair

Reinforcement Accessories

Wire Spacers 3 Concrete Spacers 5 Plastic Spacers 1 Tying Wire 2 Slab Accessories 6 Bolt boxes 3 Holding down bolts 1

Sealants & Adhesives

Adhesives 5 Arbo Sealants 6 BSSP Sealants 2 Everbuild Sealants 11 Expanding Foam 5 Sika Sealants 6 Fosroc Sealants 11

Site Consumables

Streetscape

Parex 4 Instarmac 3 Larsen 3 Steintec 3

Structural Waterproofing

Triton TT55 is a single component polymer modified cement based protective and waterproof slurry coating. When mixed and applied correctly it forms a highly effective damp proof membrane that can be applied to sound brickwork, concrete, concrete blockwork or any cementitious substrate.

Mixing

Place 25kg Triton TT55 into a clean container. Add 5.5-6 litres of clean water or gauging solution* and stir using a mechanical whisk for approximately 5 minutes. Ensure that the TT55 has fully dispersed and that the mix is smooth and lump free.
Gauging Solution – 4 parts clean water: 1 Part Triton SBR
Re-stir as necessary to maintain workability, do not add additional water or gauging solution. Use within 1 hour of mixing.