A more and more common product range offering labour reductions in time and therefore cost. A full comprehensive range available on stock. Call our experts to evaluate the contract and advise on the solution!

Securifor 3D is the ultimate heavy Weldmesh panel for providing the highest degree of security with the most discreet visual impact on the environment.
The finger and toe proof mesh profile combines an anti-climb and anti-cut panel with excellent through visibility and resistance to vandalism. The rigidity of the panels is further reinforced by the inclusion of ‘V’ beams spanning horizontally between the posts.
The small mesh apertures with heavy gauge wires results in long delay times using quite simple hand tools to attempt cutting through the panel.

PANELS

Mesh pattern:

76.2 mm (3”) x 12.7mm (0.5”) welded at each intersection.

Horizontal wires:

4mm diameter at 12.7mm centres

Vertical wires:

4mm diameter at 76.2mm centres.

Weld strength:

-75% of the minimum tensile strength of the wire.

Tensile Range

540-690 N/m2

APPLICATIONS

The securifor 3D system is, due to the combinations of an attractive design and a high security level, suitable for application in schools, hospitals, railways, warehouses and commercial or industrial sites.

Nylofor® Panel Systems
A more and more common product range offering labour reductions in time and therefore cost. A full comprehensive range available on stock. Call our experts to evaluate the contract and advise on the solution!

Radon Membrane
Radon is a naturally occurring radioactive gas formed by the breakdown of uranium and radium. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.

C02/Radon Membrane
Carbon Dioxide is a colourless, odourless gas formed as a by-product of decomposing organic matter. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.