Brush-on or spray applied surface treatment solutions.

Curing Membranes

A complete range of spray-applied curing compounds that also gives increased durability and improved surface hardness. Where other surface treatments are likely, silicate solution is preferred. Cleaning solvents.
Resin & Silicate: 25ltr & 210ltr
Solvents: 5ltr & 25ltr

Easi-Cure Multi 

A clear acrylic resin polymer solution which impregnates concrete surfaces to combine all the benefits of curing, hardening and sealing in one application. Coverage 10m2 per litre. Cleaning solvent.
Resin: 25ltr & 210ltr
Solvent: 5ltr

Dustproof Hardener 

A brush or spray applied silicate solution using 2 or 3  coats, to improve the surface hardness and reduce dusting. Applied in diluted form, The degree of dilution depends on the concrete finish. Coverage for Power float finish approx. 15m2 per litre of concentrate. Dilute 1 part to 5 parts water.
25ltr & 210ltr

Easi-Prufe 

A rubberised bitumen emulsion, cold applied as a protective damp proof membrane to concrete and brickwork. It can be applied by brush or roller but not spray as a general waterproofer.
205ltr or 25ltr.
Used with turks head brush.

RIW

A water and water-vapour proof membrane for concrete floor slab, foundation walls, ducts, lintels, encased columns etc. Brush or spray applied.
205ltr & 25ltr

Concrete Floor Paint 

Colourful concrete floors become a practicality, with Concrete Floor Paint. Imparts an attractive, hard wearing finish that promotes a high standard of cleanliness. Oil and grease spillage is easily removed. May be used on new or old floors (preparation with chemical Etcher may be necessary where the surface is particularly smooth). 

Nylofor® Panel Systems
A more and more common product range offering labour reductions in time and therefore cost. A full comprehensive range available on stock. Call our experts to evaluate the contract and advise on the solution!

Radon Membrane
Radon is a naturally occurring radioactive gas formed by the breakdown of uranium and radium. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.

C02/Radon Membrane
Carbon Dioxide is a colourless, odourless gas formed as a by-product of decomposing organic matter. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.