Joint sealants, floor sealants, contact adhesives and tapes along with a full range of application accessories.

Adhesives

Our range of Adhesives will overcome problems whether they are major or minor. Listed below are just a few:

Easibond EP

An epoxy adhesive which provide effective and efficient bonding and filling of virtually all building material

Contact Adhesive

Suitable for wood, plastic laminates, PVC, leather, aluminium & chipboard. (coverage  4-6m2/ltr)

PVA Adhesive & Sealer

All purpose primer, sealer and bonding agent

Save Nails

Multipurpose rubber based adhesive that can replace mechanical fixing. eg. bricks, timber, concrete, ceramic, metal some plastics and polystyrene.

SG20

A special adhesive used in conjunction with our waterstops at complicated and simple angles. Also used for fixing waterstop to substrate.

Tapes

Preprufe Tape, Armour Tape, Bitutape, Double sided Bitumen Tape, Bitumous Tape, Formwork Tape, Polytape, Warning Tape, Overbanding Tape, Waterproof Cloth Tape, Butyl Tape, Gas Resistant Tape, Ducting Tape, Bond Breaking Tape, Hessian Tape.

Sealants 

Polysulphide Sealant

Available in one part or two part. Used in walls and floors providing a sealant joint in various colours. Used with primer.

Cold Poured Sealant

Cold applied in heavily trafficked areas and where spillage may occur. Use with primer. (Colpor 200)

Expoflex

An epoxy polyurethane sealant where floors are subject to abrasive and chemical spillage.

Serviguard DW

WBS approved two part plus cement, Moisture tolerant flexible mortar for construction joints. Can also be used in holes in concrete subject to water pressure in reservoirs, sewage works and for hardstandings.

Hot Poured Bitumen

A full range of sealants used in many applications including joint sealing, overbanding, crack filling and Anti-skid. (A2, N2 Pliastic)

Nitoseal MS600

Nitoseal MS600 is a one part, civil engineering sealant suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion.

This product is unique in that it is suitable for both drinking water and waste water applications, including reservoirs, sewage tanks and non-tidal sea walls. Nitoseal MS600Æ is tough enough to withstand the influence of waste water, whilst being pure enough for use in drinking water applications. The sealant also meets international standards and demonstrates excellent water resistance, as well as resistance to dilute acids and alkalis.

Pliastic

Two grades for sealing low movement joints. In factory floors and areas where joints are closely spaced and resistance to grit and traffic are of prime importance.

Application Accessories

Barrel Gun

Heavy duty re-useable applicator gun

Follower Plate

For easy filling of guns and cartridges

Mixing Paddle

To ensure correct mixing.

Skeleton Gun

For use with disposable cartridges - available in 310ml or 400ml.

Cartridge

A disposable Cartridge.
Bond Breaking Tape

 

Nylofor® Panel Systems
A more and more common product range offering labour reductions in time and therefore cost. A full comprehensive range available on stock. Call our experts to evaluate the contract and advise on the solution!

Radon Membrane
Radon is a naturally occurring radioactive gas formed by the breakdown of uranium and radium. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.

C02/Radon Membrane
Carbon Dioxide is a colourless, odourless gas formed as a by-product of decomposing organic matter. It is crucial that when gas protection is required, the site conditions, design and application are all taken into consideration to provide an impermeable membrane, protecting the most valuable asset, “the building” against the gases that can cause future problems.